4CL2-10 4-CL2-10 CLE-0911-400 Electrochemical Chlorine Gas Sensor for Waste Incineration Flue Gas Monitoring

Uses:

• Industrial Safety Detection: It is applicable to safety detection in petroleum and production processes. Chlorine is widely used in the chemical industry, and there is a risk of chlorine leakage in petroleum refining and chemical production processes. The 4CL2 - 10 gas sensor can detect chlorine concentration in time to ensure the safety of workers and production equipment.
• Environmental Pollution Monitoring: Used for environmental pollution detection and atmospheric environment monitoring. Chlorine is a toxic gas, and its emission will cause pollution to the air. The sensor can be used in environmental monitoring stations, industrial parks and other places to monitor the chlorine content in the air and provide data support for environmental protection.
• Waste Incineration Flue Gas Monitoring: In the process of waste incineration, some harmful gases may be produced, and chlorine - containing compounds may generate chlorine gas. The sensor can be used to monitor the chlorine concentration in flue gas to help waste incineration plants control emissions and meet environmental protection requirements.
• Automobile Exhaust Detection: Although the chlorine content in automobile exhaust is relatively low, in some special cases, such as when the vehicle uses some special fuels or the exhaust treatment system fails, there may be a small amount of chlorine gas. The sensor can be used for relevant research and detection of automobile exhaust to promote the improvement of vehicle emission standards.

Characteristics:

• High - sensitivity Measurement: With a sensitivity of - 0.75 ± 0.15 μA/ppm at 20 °C, it can accurately detect low - concentration chlorine gas, and the resolution can reach 0.05 ppm, which can meet the needs of various precise detection occasions.
• Fast Response: The response time (t90) is ≤ 30 s, which can quickly respond to the change of chlorine gas concentration, and can detect the sudden leakage of chlorine gas in time, providing a shorter reaction time for safety protection.
• Good Linearity: It has good linearity within the range of 0 - 10 ppm, which is convenient for linear calibration and data processing, and simplifies the design and use of the measurement circuit.
• Strong Environmental Adaptability: It can work normally in the temperature range of - 40 °C ~ 50 °C, the pressure range of 1 ± 0.1 atm and the humidity range of 15% ~ 90% rh non - condensing, and is suitable for various harsh industrial environments and outdoor environments.
• Long - term Stability: The long - term output drift is < 2% signal/month, and the expected service life in clean air is 2 years, which can ensure the long - term and reliable operation of the sensor and reduce the maintenance and replacement cost.
• Easy to Replace: It can be used as a pin - to - pin replacement for standard 4 - series electrochemical chlorine sensors of other manufacturers, which is convenient for product upgrading and maintenance, and has strong compatibility.